Odesa

Restoring the Non-Stick Coating on a Grill Grate

Restoring the Non-Stick Coating on a Grill Grate — before
Restoring the Non-Stick Coating on a Grill Grate — after
before after
Drag the slider to compare the product before and after

We restored the non-stick coating on a diamond-mesh grill grate for a restaurant kitchen — without replacing the grate itself. Grates are often made for a specific grill model, so finding a new one isn’t always easy. Restoring the coating lets the kitchen keep its familiar grate in service.

What happened to the grate

Along the edge of the frame the coating had chipped down to bare metal. Meat can stick to exposed areas, and burnt-on residue in the mesh is harder to clean. The most vulnerable parts of a mesh grate are the frame edges, corners and rod intersections: that is where the coating usually chips first when the grate is cleaned with brushes or scrapers. Chips can tear food when it is flipped and make the surface harder to keep clean.

Granite coating for the grate

For the grate we used our Granite coating — a three-layer PTFE non-stick coating reinforced with ceramic microparticles. Its key advantage here is abrasion resistance: grill grates are cleaned regularly, and the surface has to withstand it. Like all Novaflon coatings, Granite is safe for food contact and contains no PFOA. We kept the grate’s metal base and renewed only the working surface.

Granite is a PTFE coating, so it doesn’t suit every grate: it is not designed for direct contact with open flame or uncontrolled overheating. Whether your grate can be restored depends on the type of grill — our manager will check this before you order.

The result

The mesh and frame are once again covered with an even, chip-free layer, and the grate is ready for work again.

Review from chef Oleksandr Abramov

Chef Oleksandr Abramov has been working with Novaflon for years. Besides the grill grate, we have renewed other cookware for him, including a sauté pan. That sauté pan is what he talks about in his video review.

Oleksandr knows from experience how quickly a non-stick coating wears out: at home it lasts about two years, and in a restaurant kitchen anywhere from a month to six months. To test our coating, the chef fried eggs in the restored sauté pan without a single drop of oil. You can see what happened to the base at the end of the video.

“If your favorite sauté pan or frying pan has become unusable, instead of throwing it away you can get a new coating and keep cooking your favorite food,” says Oleksandr.

Thank you, Oleksandr, for your trust and many years of cooperation.

Video review from chef Oleksandr Abramov about his restored sauté pan

When to restore a grill grate coating

  • Meat or vegetables stick to the rods even after greasing.
  • Chips and bare metal have appeared on the frame or mesh.
  • Burnt-on residue in the mesh is hard to clean.
  • The surface has become rough and the coating uneven.

We renew the coating but do not straighten deformed metal, so the grate must be flat.

Get a coating renewal quote

We restore grill grates, grill pans, sauté pans and other cookware for restaurants and homes. Send photos via Viber or Telegram — our manager will check whether the coating can be restored and calculate the cost.

More grill surface restorations

For the Kotelok mussel bar in Odesa we restored grill pans, also with Granite coating.

Заощаджуйте тисячі гривень на покупці нових виробів!

Замовте оновлення покриття від кухонних приладів до промислових механізмів.

Замовити

Thank you! Your application has been accepted.

We will contact you soon!

Thank you! Your application has been accepted.

We will contact you soon!

Thank you! Your application has been accepted.

We will contact you soon!

Thank you! Your application has been accepted.

We will contact you soon!

В кошику
Ваш кошик порожній